| Data | 18/05/2012 |
| Rame €/ton | 6.128,06 |
| cambio €/$ | 1.2721 |
Multipair
- PE/IS/OS/PVC/LC/PVC/SWA/PVC
- XLPE/IS/OS/LSZH/LC/LSZH/SWA/LSZH
Applications
Can be used in cable tray or conduit to connect electrical instrumentation and communication circuits in industrial process controls, refineries, oil and gas plant. Excellent protection against corrosion, humidity and poor vibration resistance.
Temperature range
-20 °C to +80 °C (for general use);
-40 °C to +90 °C (on request).
Minimum bending radius
20 times the outer diameter.
Applicable Standards
| BS 5308 or EN 50288-7 |
Basic design |
| IEC 60332-1 | Flame retardant |
| IEC 60332-3 | Fire retardant (cat. C or A according to requirements) |
| IEC 60754-1 | Halogen free properties (only for LSZH cables) |
| IEC 61034-2 | Low smoke emission (only for LSZH cables) |
Available on request
Tinned conductors.
Single triad or multitriads.
Galvanized steel tape armour (GSTA).
Different insulation and sheath colours.
Sheath materials can be provided for excellent water, oil, hydrocarbons, UV resistance or other special performance.
Cable construction
Conductors
Plain annealed electrolytic copper wire according to EN 60228 class 1(U) solid, class 2 (R) stranded, class 5 (F) flexible.
Insulation
PVC, PE, XLPE or LSZH thermoplastic material.
Twisting
The insulated cores shall be twisted in pairs for a good reduction of the electromagnetic noise.
Individual screen
Aluminium/polyester tape, coverage >100%, aluminium in contact with tinned copper drain wire.
Cabling
The screened pairs are cabled with suitable non hygroscopic fillers (when necessary) and wrapped with polyester tape if required.
Overall screen
Aluminium/polyester tape, coverage >100%, aluminium in contact with tinned copper drain wire.
Bedding
PVC or LSZH thermoplastic material.
Lead Sheath
Lead alloy.
Inner sheath
PE, PVC or LSZH thermoplastic material.
Armour
Single layer of galvanized steel wires (SWA).
Outer sheath
PVC or LSZH thermoplastic material.