not armoured
armoured
Firecel SR 125H are designed, manufactured and tested as data transmission cables for emergency services. These are used for data and voice transmission when high frequency signal has to be assured also in the event of a fire.
-40°C to +90°C (for insulated conductors only: max 200°C).
Not armoured type:
12 times the outer diameter.
Armoured type:
15 times the outer diameter.
| BS 5308 or EN 50288-7 |
Basic design |
| BS 6387 – CWZ | Fire resistant |
| IEC 60331 | Fire resistant |
| IEC 60332-1 | Flame retardant |
| IEC 60332-3 | Fire retardant (cat. C or A according to requirements) |
| IEC 60754-1 | Halogen free properties (only for LSZH cables) |
| IEC 61034-2 | Low smoke emission (only for LSZH cables) |
Tinned conductors.
Single triad or multitriads.
Moisture barrier.
Galvanized steel wire braid (GSWB) or galvanized steel tape armour (GSTA).
Different insulation and sheath colours.
Sheath materials can be provided for excellent water, oil, hydrocarbons, UV resistance or other special performance.
Enhanced grade to BS 5839-1.
Plain annealed electrolytic copper wire according to EN 60228 class 1(U) solid or class 2 (R) stranded.
High performance fire resistant silicone rubber.
The insulated cores shall be twisted in pairs for a good reduction of the electromagnetic noise.
The pairs/triads are cabled with suitable non hygroscopic fillers (when necessary) and wrapped with polyester tape if required
Aluminium/polyester tape, coverage >100%, aluminium in contact with tinned copper drain wire.
LSZH thermoplastic material.
Single layer of galvanized steel wires (SWA).
PVC or LSZH thermoplastic material.