• immagine5
  • immagine2
  • immagine6
  • immagine3
  • immagine1
  • immagine4
Home » »

Standard for copper cables

 ANSI American National Standard Institute
ANSI MC 96.1 Temperature measurement thermocouples
 BS British Standard Institution
BS 4937l International thermocouple reference tables
BS 5308 Standard for instrumentation cables
BS 5839-1 Fire detection and alarm system for building. Code of practice
BS 6387 Specification for performance requirements for cables required to maintain circuit integrity under fire conditions
BS 6425-1 Method of determination of amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
BS 6425-2 Determination of degree of acidity (corrosivity) of gases by measuring PH and conductivity
BS 6724, Appendix F Measurement of smoke density using the 3 m test cube (Absorbance)
BS 7622 Measurement of smoke density of electric cables burning under defined conditions (LT)
BS 8434 Method of test for assessment of the fire integrity of electric cables
 CEI Comitato Elettrotecnico ItalianoCEI
CEI 20-11
EN 50363
Insulating, sheathing and covering materials for low voltage energy cables
CEI 20-22/2 Prove di incendio su cavi elettrici. Prova di non propagazione dell’incendio
CEI 20-22/3
EN 50266
Test for vertical flame spread of vertically-mounted bunched wires and cables
CEI 20-29
EN 60228
Conductors of insulated cables
CEI 20-35/1
EN 60332-1
Test for vertical flame propagation for a single insulated wire or cable
CEI 20-36/1
CEI 20-36/2
IEC 60331
Test for electrical cables under fire conditions. Circuit integrity
CEI 20-37/2-1
EN 50267-2-1
Method of determination of amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
CEI 20-37/2-2
EN 50267-2-2
Determination of degree of acidity (corrosivity) of gases by measuring PH and conductivity
CEI 20-37/2-3
EN 50267-2-3
Determination of degree of acidity of gases for cables by determination of weighted average of pH and conductivity
CEI 20-37/3
EN 61034
Measurement of smoke density of cables burning under defined conditions
CEI 20-37/4 Determinazione dell’indice di tossicità dei gas emessi dai cavi
CEI 20-37/6 Misura della densità del fumo emesso da materiali dei cavi sottoposti a combustione in condizioni definite. Metodo dei 300 grammi
CEI 46-143
EN 50288-7 
Sectional specification for instrumentation and control cables
CEI 65-20 Termocoppie - Parte 3: Tolleranze e metodo di identificazione dei cavi di estensione e di compensazione
 DIN Deutsches Institut fur NormungDIN
DIN 43710 Thermospanungen und werkstoffe der thermopaare
DIN 47100 Fernmeldeschnuere; Kennzeichnung der Adern, Farben der Aussenhuellen
DIN 60584 Thermocouples
 EEMA Engineering Equipment and Material Users Ass.
EEMUA 133 Specification for underground armoured cable protected against solvent penetration and corrosive attack
 EN European Norm
EN 50200 Methods of test for resistance to fire of unprotected small cables for use in emergency circuit
EN 50266 Test for vertical flame spread of vertically-mounted bunched wires and cables
EN 50267/2-1 Method of determination of amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
EN 50267/2-2 Determination of degree of acidity (corrosivity) of gases by measuring PH and conductivity
EN 50288-7 Sectional specification for instrumentation and control cables
EN 50362 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits
EN 50363 Insulating, sheathing and covering materials for low voltage energy cables
EN 60228 Conductors of insulated cables
EN 60332-1 Test for vertical flame propagation for a single insulated wire or cable
EN 60332-2 Test for vertical flame propagation for a single small insulated wire or cable
EN 61034 Measurement of smoke density of cables burning under defined conditions
 ICEA
 NEMA
Insulated Cables Engineers Association
National Electrical Manufacturers Association
ICEA S-73-532
NEMA WC 57
Standard for Control, Thermocouple Extension, and Instrumentation Cables
 IEC International Electrotechnical Commission
IEC 60092-3 Cables: construction, testing and installation
IEC 60228 Conductors of insulated cables - Guide to the dimensional limits of circular connectors
IEC 60331 Test for electrical cables under fire conditions. Circuit integrity.
Part 21 - Cables of rated voltage up to and including 0.6/ 1.0 kV
Part 23 - Electric data cables
Part 25 - Optical fibre cables
IEC 60332-1 Test on electric cables under fire conditions. Test on a single vertical insulated wire or cable
IEC 60332-2 Test on electric cables under fire conditions. Test on a single small vertical insulated copper wire or cable
IEC 60332-3 Test on electric cables under fire conditions.Test for vertical flame spread of vertically-mounted bunched wires or cables
IEC 60502 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV)
IEC 60754-1 Method for determination of amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
IEC 60754-2 Determination of degree of acidity (corrosivity) of gases by measuring pH and conducivity
IEC 60584 Extension and compensating cables
IEC 61034-2 Measurement of smoke density of electric cables burning under defined conditions (LT)
 IEEE Institute of Electrical and Electronics Engineering
IEEE 383 Standard for Type Test of Class 1E Electric Cables, Field Splices and Connections for Nuclear Power Generating Stations
 NEK Norsk Elektroteknisk Komite
NEK 606 Cables for offshore installations halogen-free and/or mud resistant
 NF Norme Française
NF-C-32-070 Essais de clasification des conducteurs et cables du point de vue de leur comportament au feu
NF-C-42-324 Cables d'extention et de compensation pour couples thermoelectriques.Composition, nature des materiaux, essais de fabrication
NF-X-70-100 Analyse de gaz de pyrolyse et de combustion
NF M 87-201 Câbles d'extension ed de compensation pour thermocouples
NF M 87-202 Industrie du pétrole - Câbles d'instrumentation
 UNI Ente Nazionale Italiano di Unificazione
UNI 7938 Termocoppie - Classificazione e caratteristiche statiche
 UTE Union Tecnique de l’Electricitè
UTE C 20 -454 Methode d’essai pour l’analyse et la dosage de gaz nocifs